Steel Hanger Strap, G20-124HC, 3/4 IN x 10 FT

This 3/4-in x 10-ft 24 gauge ProLine Series Galvanized Steel Hanger Strap can be used where necessary to support CTS, IPS or DWV pipe. It features 1/4-in or 3/16-in pre-drilled pilot holes in alternating pattern and strap shall be 3/4-in wide and should be installed in accordance with national codes pertaining to hanger spacing and slope requirements. This hanger strap may be looped or double wrapped around piping as well as installed on same side or opposite sides of floor joist or stud members. Cut hanger strap to desired length.

FEATURES

• Use approved hardware (not provided) to secure hanger strap with nail or screw to joist or stud member
• Wear gloves and eye protection when handling metal hanger strap to avoid injury
• Strap has alternating 1/4-in and 3/16-in diameter nail holes
• Flexible and easy to work with
• Nails sold seperately
• Ideal for use with metal pipes